Miniature Snow Cannon Tower | Articulated

This miniature tower snow cannon model is designed to add a realistic detail to any winter scene or ski resort diorama, to decorate or play.

The model is fully interactive, featuring a fan that can be spun. Additionally, the cannon can be tilted up and down and rotated by 360°, allowing for perfect placement in your display. It is designed as a multi-part model, making it easy to print in various colors without waste through simple assembly.

Features:

- Fully adjustable: The cannon can be tilted up and down or rotated by 360° - Spinning Fan: The fan on the back can be spun by hand or blowing on it - Optimized for Multi-Color: Designed as a multi-part assembly for easy printing in different colors without waste. - Scale: ~ 1:50

Quick Guide to Print Profiles:

This model is designed for maximum flexibility and compatibility, supporting all printers and printing methods:

- Universal Single-Color (All Printers) The main profile (Single & Multi Color) includes a dedicated "ALL PARTS" plate, allowing you to print the entire model in one job and one color. - Manual Multi-Color (Waste-Free) To print in multiple colors without an AMS, simply load the profile and print the three color-grouped plates sequentially, swapping the filament spool between each plate. - P1/X1 AMS Optimized (One-Click): For P1S/X1C users with an AMS, a separate, dedicated "Sequential Printing" profile is available for the most efficient, one-click, low-waste printing experience.

Note:

- The tolerances of this model are made for printing with PLA. So it might not work with other materials. - If you want to use your own print profile, please use Arachne for the walls.

Assembly:

Step 1:

Mount the Fan onto the tube as shown in the picture. Important Note: This is a delicate press-fit connection with small clamps. Please be careful and apply gentle, even pressure. Make sure to push the fan on straight to avoid damaging the clamps.

Step 2:

Place the Tube on top of the Main Body as shown in the picture. Press down firmly from above until you hear it click securely into place.

Step 3:

Now connect the Main Body to the top of the Pillar as shown in the picture.

Step 4:

At last, connect the Main Body to the top of the Pillar as shown in the picture.

You want more winter models?

There is also a non-Tower Version of the Snow Cannon available.

I also designed a Miniature Gondola Cabin in the same scale . It's designed to be hung from a piece of filament and comes in two versions: A winter version with a ski rack A summer version without the rack

Boost Me If you like my model, feel free to support me with a like, follow or a boost.