Top Intake Protector Filter For xTOOL F2/F1

Overview

This 3D printable model is a protective filter designed to fit the top air intake (inlet) of the XTOOL F2 and F1 laser engravers. It effectively prevents debris, wood chips, and other large particles from the outside from entering the machine, helping to protect internal optical components and electronics .

Installation is recommended using strong double-sided tape .

Key Features

- Dedicated Design: Custom-fitted for the top air intake of the F2 and F1. - Debris Protection: Shuts out the intrusion of debris and wood chips from the intake, safeguarding delicate internal components. - Easy Installation: Installation is recommended using strong double-sided tape . Compatibility & Hardware

- Compatible Models: - XTOOL F2 / XTOOL F1: Dedicated for the top air intake (inlet) - Printed Parts: Fan Filter - Required Hardware (Recommended): - Strong double-sided tape (e.g., high-temperature or high-adhesion tape) Installation Methods

Recommended method for mounting the filter on the F2/F1 top intake:

- Double-Sided Tape Mounting: - Apply strong double-sided tape to the back of the filter. - Clean and degrease the mounting area around the top grille of the F2/F1, then align the filter accurately before pressing it into place. Important Notes

- Double-Sided Tape: Please use high-temperature and high-adhesion double-sided tape for secure fastening. - Filament Selection: Since the interior of the device may become hot, we recommend using high-temperature resistant filaments such as PETG or ABS instead of PLA. - Logo: The custom logo seen in the images is not included in the 3D print model files . Users who wish to add a logo must do so themselves via laser engraving or other methods.

🔥 my favorite printer upgrade for P2S 🔥

🔥 Easy-Clean Debris Tray for Bambu Lab P2S

Poop Chute Bin Ultra Fast&Eco for Bambu Lab P2S

Spool Holder Bearing Upgrade Kit for P2S

PTFE Connector Rod Extender for Bambu P2S