P1S 4 Inch Exhaust Fan Duct (Screw In)

Screw in 4 inch exhaust adapter for the Bambu P1S. Intended for use with 4" flexible air ducting to vent to the outside. 95mm OD with a chamfer to easily attach hoses.

Utilizes the 3 holes surrounding the exhaust. From the factory, these come unthreaded. An M3 machine screw will fit after you screw in an included screw with the machine to thread it. Please see https://wiki.bambulab.com/en/knowledge-sharing/exhaust-pipe-connector-installation-tutorial for more details.

I recommend M3x12 screws. M3x8 will also work. I wouldn't recommend going longer than M3x12 or shorter than M3x8. Requires 3 screws.

No magnets or tape required.

I printed in PETG and would recommend due to its higher heat resistance than PLA. Not tested with PLA.

Supports are required for the interior 4 corners and will be automatically generated with the included profile.

Boost Me Dig the model? Boost me for free to say thanks!