Geometric Wolf – One Line Wall Art (2 Versions)

0.2mm layer, 2 walls, 15% infill 🐺 Geometric Wolf – Glow Layered Wall Art

This print profile is prepared for a layered geometric wolf wall art featuring bold one-line contours and a hexagonal structure. The model is designed as frameless wall decor and prints cleanly without supports .

This profile works well on Bambu Lab printers , including:

- Bambu Lab A1 - Bambu Lab A1 Mini - Bambu Lab P1P - Bambu Lab P1S - Bambu Lab X1 Carbon - Bambu Lab X1E 🖨️ Print Settings (Profile Overview)

- Layer height: 0.2 mm - First layer height: 0.2 mm - No supports - Standard flow - Standard quality profile - Estimated print time: ~50 minutes - Material usage: ~17 g - Model size: ~100 × 70 × 7 mm 🌟 Two-Color Glow Effect (No AMS Required)

This model is designed to be printed in two colors using a manual filament change , without the need for AMS.

Recommended setup:

- Backing layer: Glow PLA - Front contour lines: Black PLA How to print:

- Start the print with Glow PLA - Pause the print after layer 9 - Manually change the filament to Black PLA - Resume the print to complete the front contour lines This creates a strong contrast and allows the glow effect to shine through the wolf’s geometry , especially in low-light conditions.

🧱 Recommended Materials

- PLA - Glow PLA for the backing layer (for visual effect) - Matte PLA recommended for clean and sharp contour lines ℹ️ Notes

- Designed to print flat on the build plate - No post-processing required - Scales well for larger wall art pieces - Suitable for wall mounting using tape or adhesive pads Print settings may vary depending on printer, firmware version and individual machine.

0.2mm layer, 2 walls, 10% infill