Modular Screwless Wall outlet switch cover plates

I present to you my new modular customizable electrical wall plate collection. I have taken a lot of time to try and create a fully customizable plate collection. The possibilities are endless using interchangeable plates. I have created commonly used plates, but am more than willing to add what you might need if I can. I do have other sets of standard screwless plates available on maker world including plates for Phillips HUE switches, just search my profile for the others.

Each plate will consist of at least 3 pieces, the mounting plate, the cover plate, and the insert(s). Of course this allows you to mix colors too if you are so inclined. I have printed these in PLA and PETG with no problems. PETG tends to be a bit more flexible and resilient but you shouldn't have a problem with PLA. The wire/cable pass through works best in TPU, but I did try it in PETG and it can work, just expect to break some of the little fingers off. I have placed all of the inserts on their back for printing as this will print everything the easiest and with least amount of support (only needed on a couple pieces). The inserts will look best on the outside printed face down, but it will require support and makes the rest of it (which you will NOT see once installed) a bit sloppy. If you want to print face down, you will need to reorientate in the slicer before printing. If you print face up (as orientated in my profile), I recommend using ironing for the top surfaces of the inserts (I have added ironing to only the inserts in my profile).

Each insert needs to be inserted from the back of the mounting plates (The concave side) and I would recommend using a little super glue to keep the inserts in place for initial mounting. The glue shouldn't be required, but will make things a bit easier and you will never see any glue once installed. I am going to work on a way to keep the inserts in without glue, but that will take some time and testing before I will upload it.

There are holes and recesses for any screws that you have to use on the mounting plate and electrical switches. I have included 1,2,3, and 4 gang mounting plates and covers. Everything should fit flush to the front of the cover once installed.

Included inserts include:

Decorator switch and outlet insert

Toggle switch insert

2 outlet insert (US)

Blank insert

8mm hole insert

1,2, & 3 ethernet keystone inserts

Wire/Cable pass-through insert

I would love to expand the options available if you have any suggestions or requests. Please feel free to private message me (or put in comments) if you need anything. Also, I have not been able to try each piece out, so if you run into any issues, please let me know and I will get it corrected quickly.