3D-модель · MakerWorld

GraviTrax Rails

Площадка: MakerWorld
Цена: Бесплатно
Лицензия: PRIVATE-USE; Только для личного использования: печатать для себя, без продажи и распространения.
Форматы: STL

Автор:GameThatsIt

Опубликована 14.01.2026

Описание

These Gravitrax rails, which I designed, are quick to print and use little filament.

I recommend using a brim when printing the GraviTrax rails.

I made the GraviTrax rails in four sizes: Small, Medium, Large and XL.

Settings⚙️

- 0.2mm layer height - 15% gyroid infill - 2 wall loops - Outer brim (recommended) Sizes↕️

- Small - Medium - Large - XL Check out my other models➡️ https://makerworld.com/en/@GameThatsItLab/upload

Boost Me Any like, comment / review or boost will really be appreciated! Thank You 😀!

GraviTrax Rail XL | 0.2mm layer, 2 walls, 15% infill - 0.2mm layer height - 15% gyroid infill - 2 wall loops - Outer brim (recommended)

GraviTrax Rail S,M,L,XL | 0.2mm layer, 2 walls, 15% infill - 0.2mm layer height - 15% gyroid infill - 2 wall loops - Outer brim (recommended)

GraviTrax Rail Medium | 0.2mm layer, 2 walls, 15% infill - 0.2mm layer height - 15% gyroid infill - 2 wall loops - Outer brim (recommended)

GraviTrax Rail Small | 0.2mm layer, 2 walls, 15% infill - 0.2mm layer height - 15% gyroid infill - 2 wall loops - Outer brim (recommended)

GraviTrax Rail Large | 0.2mm layer, 2 walls, 15% infill - 0.2mm layer height - 15% gyroid infill - 2 wall loops - Outer brim (recommended)

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.