Modern Geometric Table Lamp Textured Shade E14

Add a touch of modern elegance to your home decor with this fully 3D printable table lamp.

This design features a two-part construction consisting of a beautifully detailed base and a complementary shade. The base boasts a complex geometric pattern that catches the light fantastically, especially when printed in silk or metallic filaments (like the copper/bronze shown in the example images).

The conical shade has a distinct woven texture that diffuses light softly, creating a warm and inviting atmosphere in any room.

Standing at a total height of 25 cm (approx. 9.8 inches), this lamp is the perfect size for a bedside table, a desk corner, or a living room shelf.

Key Features:

- Socket Type: Designed specifically to fit standard E14 screw-base lamp sockets. - Design: Two-part print (Base and Shade). No supports required for the base. - Aesthetics: Modern geometric base paired with a classic textured shade. BOM (Bill of Materials) - Hardware Needed: To complete this lamp, you will need the following non-printed parts:

- 1x E14 Lamp Socket cord set: A standard pre-wired E14 socket with a switch and wall plug. - 1x E14 LED Bulb: Only use LED bulbs. Incandescent or halogen bulbs generate too much heat and will melt/deform the printed PLA/PETG shade. Choose a warm white LED for a cozy glow. Print Settings:

- Base: - Material: PLA or PETG. Silk PLA looks great for defining the geometry. - Infill: 5-15% is sufficient. - Supports: No supports needed. - Shade: - Material: White or translucent PLA/PETG is recommended for best light diffusion. - Optimized for printing in Vase Mode with 0,75mm layerwidth and 7 bottom layers Assembly:

- Thread your E14 socket cord through the bottom of the printed base and secure the socket at the top opening with the socket's included retaining ring (with the shade on). - Screw in your LED bulb. - Place the textured shade securely onto the base.