POLYZON
Coaster pallet
Coaster pallet — Фото 2 из 3
Coaster pallet — Фото 3 из 3
3D-модель · MakerWorld

Coaster pallet

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
CC-BY-NC
Можно печатать и изменять для себя с указанием автора; продавать модель и отпечатки нельзя.
Форматы
STL
  • 375 Лайки
  • 1 686 Загрузки
  • 888 Напечатали
  • 989 В подборках
  • 60 Бусты
  • 101 Комментарии
  • 0 Просмотры

Автор:Creative Rooster

Опубликована

Скачать на MakerWorld

Описание

This is a simple pallet coaster , it can be printed without the use of supports.

Also, it would be best to print it in some wood pla, hope you like it :)

If you like this model i also made a little holder that can store up to 4 pallet here's the link : Pallet holder

Boost Me If you enjoyed the model, a boost would mean the world to me. Have a fantastic day! :)

If you'd like to make me a small donation, here's my paypal link   Creativerooster .

Your support means so much to me :)

Руководства и профили печати

Профили печати и шаги

Larger Size 80mm square 0.2mm layer, 3 walls, 15% infill This was scaled up to 80mm square to be a more usable size for a coaster.

Since it was scaled up, also modified the infill to use less filament.

Larger 80mm- Less support 0.2mm layer, 3 walls, 15% infill A few people had issues removing the support material, so this is a version with easier-to-remove supports.

0.2mm nozzle, 0.08mm layer, 3 walls, 100% infill

No Support - Lower Top and Bridge Speed No support needed , Bridge speed set at 30mm/s. Emphasis on quality top surface with lower 60 mm/s speed.

0.2 mm layer, 3 wall loops and 15% infill

Теги

palletpallet coastercoasterwoodsimple
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.