Fairy Acorn Bird Feeder / Birdhouse

0.2mm layer, 2 walls, 15% infill 🖨️ Print Profile – Acorn Bird House

This profile is based on the current slicing shown in Bambu Studio.

The model was printed on Bambu Lab A1 using PLA Basic with a 0.4 mm nozzle and 0.20 mm layer height (Standard profile) .

The printed example shown in photos has been post-processed (light sanding / surface finishing) . Your raw print will naturally show visible layer lines depending on printer calibration and selected settings.

Printer & Profile

- Printer: Bambu Lab A1 - Nozzle: 0.4 mm - Layer height: 0.20 mm - Profile: 0.20 mm Standard - Material: PLA Basic - Supports: Tree (Auto) - Orientation: Default upright Estimated Print Results (from current slice)

- Model filament: ~122.6 g - Support filament: ~32.1 g - Total filament: ~154.8 g - Estimated print time: ~7 h 18 min (Support material represents roughly 25% of total filament.)

Model Features

- Single-color print - Single-piece model - Integrated hanging loop - Organic shape with tree supports - Beginner friendly - No assembly required Optional: light sanding after printing for smoother surface finish.

Notes

- This is a mono-color model designed for FDM printers. - PETG is recommended for outdoor use. - The model can be reoriented to reduce support material and print time if desired. ⚠️ Important: Print settings may vary depending on your specific printer model, firmware/software version, filament brand, and individual machine calibration.