Japandi Wabi-Sabi Self-Watering Planters / Pot

M — Medium (100 mm)

Wide (236×227×86 mm)

S — Small (80 mm)

L — Large (140 mm)

Optimized Fillament useage | S - Small (80 mm) If this profile worked for you, a 5⭐ rating would really help the creator and others — thank you!

Bring a touch of modern nature into your home! 🌿

This beautiful, organically shaped planter features a seamless wavy design that looks stunning in any interior. Whether you're a proud plant parent to a tiny succulent, an aloe vera, or a lush tropical plant, this pot will make them stand out! ✨

Not only does it look amazing, but it's also highly functional. The two-part design acts as a smart self-watering system . The inner pot holds your plant and soil securely, while the outer textured shell serves as a water reservoir. Just pour water into the convenient side opening, and your green friend will drink exactly as much as it needs! 💧🪴

Why you'll love printing this:

- 🚫 Zero Supports Needed: Designed to print flawlessly right on the build plate. - 🎨 Mix & Match Colors: Print the inner pot and outer shell in contrasting colors (like the elegant beige and black combo in the photos) to match your room's aesthetic. - 💧 Functional & Practical: Built-in watering spout makes plant care a breeze. Happy printing and happy planting! 💚 Don't forget to share your makes—I'd love to see the color combinations you choose! 📸

Max Wide (256×247×93 mm) A rescaled version of the beautiful Japandi Wabi-Sabi Self-Watering Planter 🌿

This version is based on the original Wide model , but with increased external dimensions to provide more planting space while preserving the elegant Japandi aesthetic ✨

📏 Size Comparison

Original Wide Version

- 236 × 227 × 86 mm This "Max Wide" Version

- 256 × 247 × 93 mm 🔥 The model was uniformly rescaled to create a larger and more visually impactful planter while maintaining the original proportions and design language.

IKEA FEJKA Planter 9cm - 0.2mm layer, 2 walls, 5% infill Remixed the ‘M’ model to fit IKEA FEJKA 9CM Planter

0.2mm layer, 2 walls, Avoid Crossing Walls, No Arc Fitting Same as original, but with Avoid Crossing Walls and no Arc Fitting. I also had some issues with the seam on the inside piece. If I were to do it again, I might try random seam.

Huge Version 254mm inner / 310mm outer - PETG 0.6mm nozzle I wanted a big pot for a hanging plant and this was the perfect model Self-watering and so I decided to bite off the largest print I ever ran on my H2s. I maxed it out to 310mm / 254mm inside diameter.

0.6 HF nozzle to get it done. Variable height tending towards .4mm. Better for sealing water. I kept the variable wall count per original design.

Time/Material:

Outer : It printed for 12 hours for the outside shell and used almost 800g of PETG.

Inner : The inner sleeve was a bit over 4 hours and over 400g of petg. Drip Tray : After all that, it leaked! So, I designed an inner tray/sleeve that fits perfectly inside the big outer shell and uses cleanly sloped walls so they layers bonded perfectly with PETG and it holds water now. The inner sleeve was only a 2 hour print and a little over 100g of filament.

All the settings are dialed in in this 3mf.

I love how it looks. By my calculations, it cost about $20 worth of filament and is a stunning vase. Totally worth it. I didn't actually print it on H2C nor H2D, but assuming it will fit based on size. I kept a bit of buffer within my H2S, which is slightly larger build volume than the other two.

Thanks for looking.