Philips Hue Remote Adapter - Decora Paddle Switch

This is an adapter to put your Philips Hue Remote ( Philips Hue Dimmer Switch (Gen 2)) overtop of an existing light switch. Designed to fit over standard and mid-way sized single gang decora paddle switches

Should work with existing faceplate screws, this adapter goes over top of the existing faceplate. The Philips Hue Remote ( Philips Hue Dimmer Switch (Gen 2)) panel snaps onto this adapter, and is easily removeable by prying off along the gap at the bottom, allowing access to the original switch if needed.

Installation:

- Remove existing faceplate screws. - Place adapter on top of existing faceplate. - Insert screws into holes and screw in. This may be snug - take care to avoid cracking your faceplate. Longer screws may be needed in some installations. - Snap the Philips Hue cover onto the adapter. - Place your remote onto the Philips Hue cover.

Printing:

I printed this in Bambu PETG-HF. Standard supports were used with PLA interface to make a smooth bottom surface, but feel free to use the support approach that works best for you. The underside is not seen, so does not need to be perfect.