Unique table lamp (LED 001 kit) - MH001

Membership Support my work and unlock commercial rights for eligible MakerWorld models! To see if a model is included, simply look for this text box at the top of the model description - if it's there, the model is covered by your subscription. Your support helps me create and release more designs. Thank you for being part of the journey!

⭐❤️✨ I used many hours on this project to make it work and im very proud of the outcome. A BOOST AND A FOLLOW WOULD MEAN VERY MUCH! - Please help me show this project to the world! Thank you! 🤩❤️✨

This “wavy” lamp is made for the Bambu Lab LED 001 kit - MH001. The vertical fins create a striking architectural look while beautifully diffusing the light. I've printed it using Bambu PLA Basic Blue, but have also earlier tried translucent filament which also gives off an amazing light. I would love to see your choice of color in the comments.

Feel free to contact me with questions or specific changes to the model.

Boost Me If you enjoy the model please consider giving a boost and a follow - it helps a lot. Thanks! Commercial license available at Patreon .

Assembly guide

Start by assembling the diffuser by carefully lining up the top part and bottom part and push straight down until you're left with something like the picture below.

Put glue on the red marked area on each half of the lamp. One of the sides has a groove - put glue in that aswell (See red arrows)

Then lay the center diffuser onto one half of the lampshade. Then lay the other half of the lampshade on top, making sure that the groove lines up. Then push them together. Now use the printed tool to hold together the fins while the glue cures.

Put something heavy on top and wait until the glue has cured.

Now insert the Bambu MH001 LED kit.