Beer Bottle Opener
Beer Bottle Opener — Фото 2 из 2
3D-модель · MakerWorld

Beer Bottle Opener

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
3MF
  • 6 205 Лайки
  • 21 556 Загрузки
  • 15 672 Напечатали
  • 16 746 В подборках
  • 188 Бусты
  • 864 Комментарии
  • 0 Просмотры

Автор:DDDP

Опубликована

Скачать на MakerWorld

Описание

Boost Me Beer Bottle Opener

!!! IMPORTANT UPDATE: An improved version of this bottle opener is now available. Check it out! 🍺 https://makerworld.com/en/models/3133599-beer-bottle-opener-v2#profileId-3536872 !!!

I have developed a beer bottle opener that fits many beer bottles and is designed to launch the bottle cap off when opening.

Bottle shapes and dimensions can vary considerably, so the opener may not fit every bottle. Its performance may also be affected by the filament, print quality, print settings, printer calibration, and the condition of the bottle.

If the opener does not work properly for you, please feel free to contact me, and we will try to find a solution.

WARNING: Use with caution and ensure the safety of yourself and those around you when ejecting the bottle caps. Use at your own risk.

Print time under 35 minutes, less than 16 grams of filament, support-free, and 100% printable.

I hope you have fun with it!👌🍺

Boost Me Prototyping takes time and filament, so I’d really appreciate your support with boosts, likes, or comments.

Руководства и профили печати

Файлы руководств

Профили печати и шаги

0.2mm layer, 6 walls, 30% infill UPDATE: Improved stability.

- 0.2 mm standard profile with - 6 Walls - 30% infill - supportless - 34 min - 16 g - PLA

Stronger PETG, 0.2mm layer, 6 walls, 30% infill (P2S) - Stronger PETG - P2S Ready

100% infill STRONGER VERSION

0.22mm layer, 3 walls, 35% infill Ce profil est conçu pour obtenir des impressions rapides, propres et fiables tout en conservant l’esthétique caractéristique de l’impression 3D avec des lignes de couches visibles et régulières.

L’objectif principal est de réduire le temps d’impression tout en maintenant une bonne qualité de surface et une solidité suffisante pour des pièces utilitaires.

Beer Bottle Opener – Keychain Mod A modified version of the awesome Beer Bottle Opener 🍺

This version adds a keychain hole , making it easy to carry on your keys, backpack, or workshop lanyard 🔑

And yes… it still launches the bottle cap 🚀🍻

💪 Reinforced Print Profile

The print profile has been optimized for better strength and durability by increasing the number of walls/perimeters.

This results in:

- Stronger structure - Better resistance during use - Improved long-term durability While this slightly increases print time, the material usage changes very little — and the extra strength is absolutely worth it 👌

细节优化版

Теги

beerbottlecapbottle openeropenerbeer opener

Комментарии

Загружаем комментарии…
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.