Cool Bunny

H2C / Multicolor 5 Color 0.2mm layer, 3 walls, 15% infill ℹ Tips for printing Multicolor:

- Filament: PLA - Supports:  Yes! - Support Wall Loops: 2 - Branch Diameter: 3 - Layer height:   0,2mm - Wall loops: 3 - Infill: 15% - Seam position: back - Wall generator: - - Detect thin walls: - - Brim:  No! - BuildPlate: - - Info‼:   Do not scale the CoolBunny any smaller otherwise some multicolor parts won't print as good ℹ Please make sure that the slicer places supports underneath the hoodie, the sunglasses, and the baseball cap.

ℹ I had some issues with the supports not holding well under the sunglasses, so I adjusted the following support settings:

- Support Wall Loops: 2 - Branch Diameter: 3 ℹ If you are comfortable with your own slicer settings, feel free to adjust these values as you prefer.

------------------------------------------------------

❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (5 Color):

- PLA Matte / White - PLA Matte / Black - PLA Matte / LightBrown - PLA Matte / Pink - PLA Basic / DarkGreen Or decide for yourself which colors and how many you want to use!

ℹ !This model is extremely filament wasteful please keep that in mind! Print this model only if you have a 3D-Printer that will not produce filament purge wastage!

------------------------------------------------------

ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!

(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)

H2D / Multicolor 5 Color 0.2mm layer, 3 walls, 15% infill ℹ Tips for printing Multicolor:

- Filament: PLA - Supports:  Yes! - Support Wall Loops: 2 - Branch Diameter: 3 - Layer height:   0,2mm - Wall loops: 3 - Infill: 15% - Seam position: back - Wall generator: - - Detect thin walls: - - Brim:  No! - BuildPlate: - - Info‼:   Do not scale the CoolBunny any smaller otherwise some multicolor parts won't print as good ℹ Please make sure that the slicer places supports underneath the hoodie, the sunglasses, and the baseball cap.

ℹ I had some issues with the supports not holding well under the sunglasses, so I adjusted the following support settings:

- Support Wall Loops: 2 - Branch Diameter: 3 ℹ If you are comfortable with your own slicer settings, feel free to adjust these values as you prefer.

------------------------------------------------------

❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (5 Color):

- PLA Matte / White - PLA Matte / Black - PLA Matte / LightBrown - PLA Matte / Pink - PLA Basic / DarkGreen Or decide for yourself which colors and how many you want to use!

ℹ !This model is extremely filament wasteful please keep that in mind! Print this model only if you have a 3D-Printer that will not produce filament purge wastage!

------------------------------------------------------

ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!

(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)

X1C / Multicolor 5 Color 0.2mm layer, 3 walls, 15% infill ℹ Tips for printing Multicolor:

- Filament: PLA - Supports:  Yes! - Support Wall Loops: 2 - Branch Diameter: 3 - Layer height:   0,2mm - Wall loops: 3 - Infill: 15% - Seam position: back - Wall generator: - - Detect thin walls: - - Brim:  No! - BuildPlate: - - Info‼:   Do not scale the CoolBunny any smaller otherwise some multicolor parts won't print as good ℹ Please make sure that the slicer places supports underneath the hoodie, the sunglasses, and the baseball cap.

ℹ I had some issues with the supports not holding well under the sunglasses, so I adjusted the following support settings:

- Support Wall Loops: 2 - Branch Diameter: 3 ℹ If you are comfortable with your own slicer settings, feel free to adjust these values as you prefer.

------------------------------------------------------

❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (5 Color):

- PLA Matte / White - PLA Matte / Black - PLA Matte / LightBrown - PLA Matte / Pink - PLA Basic / DarkGreen Or decide for yourself which colors and how many you want to use!

ℹ !This model is extremely filament wasteful please keep that in mind! Print this model only if you have a 3D-Printer that will not produce filament purge wastage!

------------------------------------------------------

ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!

(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)