POLYZON
Flarewing - Flappy Print-In-Place Dragon
Flarewing - Flappy Print-In-Place Dragon — Фото 2 из 7
Flarewing - Flappy Print-In-Place Dragon — Фото 3 из 7
Flarewing - Flappy Print-In-Place Dragon — Фото 4 из 7
Flarewing - Flappy Print-In-Place Dragon — Фото 5 из 7
Flarewing - Flappy Print-In-Place Dragon — Фото 6 из 7
Flarewing - Flappy Print-In-Place Dragon — Фото 7 из 7
3D-модель · MakerWorld

Flarewing - Flappy Print-In-Place Dragon

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
STL
  • 6 584 Лайки
  • 15 705 Загрузки
  • 11 182 Напечатали
  • 19 386 В подборках
  • 821 Бусты
  • 1 115 Комментарии
  • 0 Просмотры

Автор:hollowmaker

Опубликована

Скачать на MakerWorld

Описание

Update 1.1 (2026-04-12):

- The wing mechanism was completely redesigned with a focus on stability. - The connection between the outer wing and inner wing was improved. - Color bleeding on the wing and body was fixed. - Misaligned / off-center back spike was corrected.

Same functionality as before, but optimized for stability and visual details.

⚠️The print time is based on the H2C – when using other printers it may vary!

Additional print bed adhesive (e.g., 3D-Lac, hairspray for PEI, or glue stick for the Cool Plate) is strongly recommended, and the bed should be cleaned with alcohol or soap before each print to ensure optimal adhesion and high-quality results ⚠️

Flarewing is a small interactive dragon designed to stand proudly on its hind legs while featuring a fun built-in wing mechanism. By gently pressing on the dragon’s back, the wings begin to move and perform a flapping motion.

The entire model is designed as a print-in-place mechanism, meaning everything prints fully assembled and ready to play right off the build plate.

Features:

- Print-in-place design / No assembly required! - Interactive wing flapping mechanism - Standing pose on hind legs To make printing easy for different setups, several print profiles are included:

- Single Color A clean single-filament print for quick and simple results. - 3-Filament Multicolor – Eyes & Teeth Only the eyes and teeth are painted for subtle detail with minimal filament swaps. - 3-Filament Multicolor – Eyes, Claws & Horns Adds color accents to eyes, claws and horns for a more detailed appearance. - 4-Filament Multicolor A fully detailed multicolor profile with additional color separation for the most vibrant result. If you enjoy this model, I would really appreciate a like and a boost - it helps a lot and supports my work 😊 Thank you! 🙏

Руководства и профили печати

Профили печати и шаги

Singlecolor Attention!   Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or alternatively hairspray for PEI print beds, and a glue stick for Bambu’s original Cool Plate.

Ensure to clean the print bed with alcohol or soap before each print to achieve optimal adhesion and high-quality results.

- 0.2mm layer, 2 walls, 8% infill - Filament used in photo: Bambu PLA Silk Midnight Blaze (Blue-Red) - This print profile was created for printing with the H2D from BambuLab. Print times may vary significantly when using other printers.

4-Filament Multicolor Attention!   Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or alternatively hairspray for PEI print beds, and a glue stick for Bambu’s original Cool Plate.

Ensure to clean the print bed with alcohol or soap before each print to achieve optimal adhesion and high-quality results.

- 0.2mm layer, 2 walls, 8% infill - Filament used in photo: Bambu PLA Silk Midnight Blaze (Blue-Red) - This print profile was created for printing with the H2D from BambuLab. Print times may vary significantly when using other printers.

3-Filament Multicolor Attention!   Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or alternatively hairspray for PEI print beds, and a glue stick for Bambu’s original Cool Plate.

Ensure to clean the print bed with alcohol or soap before each print to achieve optimal adhesion and high-quality results.

- 0.2mm layer, 2 walls, 8% infill - Filament used in photo: - This print profile was created for printing with the H2D from BambuLab. Print times may vary significantly when using other printers.

3-filament Multicolor (Eyes + Teeth Colored) Attention!   Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or alternatively hairspray for PEI print beds, and a glue stick for Bambu’s original Cool Plate.

Ensure to clean the print bed with alcohol or soap before each print to achieve optimal adhesion and high-quality results.

- 0.2mm layer, 2 walls, 8% infill - Filament used in photo: - This print profile was created for printing with the H2D from BambuLab. Print times may vary significantly when using other printers.

A1-Mini / 3-Filament Multicolor Attention!   Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or alternatively hairspray for PEI print beds, and a glue stick for Bambu’s original Cool Plate.

Ensure to clean the print bed with alcohol or soap before each print to achieve optimal adhesion and high-quality results.

- 0.2mm layer, 2 walls, 8% infill

A1-Mini / 3-filament Multicolor (Eyes + Teeth Colored) Attention!   Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or alternatively hairspray for PEI print beds, and a glue stick for Bambu’s original Cool Plate.

Ensure to clean the print bed with alcohol or soap before each print to achieve optimal adhesion and high-quality results.

- 0.2mm layer, 2 walls, 8% infill

A1-Mini / 4-Filament Multicolor Attention!   Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or alternatively hairspray for PEI print beds, and a glue stick for Bambu’s original Cool Plate.

Ensure to clean the print bed with alcohol or soap before each print to achieve optimal adhesion and high-quality results.

- 0.2mm layer, 2 walls, 8% infill

0.225mm layer, 1 walls, 8% infill

SPYRO PAINT - 4 COLORS

2-Filament Multicolor (two different variants) • 0,16mm layer

• 2 walls

• 15% infill

• Arachne

3 on one plate

TOOTHLESS PAINT - 4 COLORS

RESIZED 120%, 0.2mm layer, 3 walls, 10% infill

Теги

articulateddragonflappywingedflexiflexibleflyingflareicefirestandingcutetoyprint in placewyvernminimysticalcreaturefantasychibiposeablepushbuttoninteractivehollowmakerfidgetdungeon
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.