Heavy Duty Cable Holder Kabelbinderhalterung

📝 Description

A sturdy cable holder designed for large cables up to 35–40 mm in diameter . Perfect for power cords, extension leads, thick HDMI or audio cables, and even bundling multiple wires together.

The model supports two mounting methods, making it suitable for walls, under desks, cabinet backs, or any other surface.

Key Features:

- For large cables: accommodates cables up to 35–40 mm in diameter - Reliable mounting: screw hole diameter is 6.2 mm — compatible with most screws, wall plugs, and hammer-in anchors - Two mounting options: - Screw mounting (via through-hole) - Adhesive tape mounting (flat back surface) - Easy to print: no supports required 🛠 Print Instructions

Parameter Recommendation

Material PLA, PETG, ABS (PETG recommended for higher load or long-term use)

Nozzle 0.4 mm

Layer height 0.2 mm

Infill 20–25%

Walls 3–4

Supports ❌ Not required

Tip: If the holder will be used for heavy cables or under constant tension, PETG is preferable — it offers better creep resistance than PLA.

🔧 Mounting Instructions

1. Screw mounting (for walls, wood, particle board)

- Use a screw with a diameter of 3.5–4.5 mm (flat or pan head recommended) - The 6.2 mm hole provides a small tolerance for easy positioning 2. Adhesive tape mounting (for smooth surfaces)

- Ideal for tiles, glass, metal, or laminated surfaces - Use foam-based double-sided tape (e.g., 3M VHB or equivalent) for best results 📏 Dimensions

Parameter Value

Cable diameter up to 35–40 mm

Mounting hole diameter 6.2 mm