Atlanta Braves MLB 50mm x 150mm Bookmark

Show off your Atlanta pride with this Braves-inspired bookmark design, packed with dynamic motion and classic baseball vibes! Featuring bold team colors, flying baseballs, and a stadium backdrop, this design brings game-day energy right to your prints.

Project: Atlanta 5C.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.04x150.03mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2mm and the Actual Thickness is 2mm

#000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6 #1c254c PLA BambuLab Matte Dark Blue  Transmission Distance: 1 #de4343 PLA BambuLab Matte Scarlet Red  Transmission Distance: 2 #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6 #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5 This print uses 5 unique filaments

Swap Instructions: Start with Charcoal At layer #6 (0.56mm) swap to Dark Blue At layer #9 (0.8mm) swap to Scarlet Red At layer #12 (1.04mm) swap to Yellow At layer #14 (1.2mm) swap to Ivory White for the rest.