Slate look - deadpool and walverine - hueforge

Slate look hueforge of walverine and deadpool.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.4mm and the Actual Thickness is 2mm

#000000 PLA Sunlu + 2.0 Black  Transmission Distance: 0.1 #5b6579 PLA BambuLab Basic Blue Gray  Transmission Distance: 2.2 #8e9089 PLA BambuLab Basic Gray  Transmission Distance: 0.2 #ffffff PLA Sunlu + 2.0 White  Transmission Distance: 6.8 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #11 (0.96mm) swap to Gray At layer #16 (1.36mm) swap to White for the rest.