Mammotion Yuka Mini | Aeration Spikes

Give your lawn some room to breathe while your Yuka Mini does the heavy lifting. These aeration spikes are designed to screw onto the wheels of the Mammotion Yuka Mini, turning your routine mow into a soil-conditioning session.

The "Manual" Trade-off

Please Read: Because these spikes extends a fair amount from the wheel, the robot cannot successfully navigate back to its charging station or dock itself while they are installed.

This mod is intended for supervised, temporary use :

- Attach the spikes. - Run your specific aeration/mowing task. - Manually guide or carry the robot back to the charger and remove the spikes once finished. Print Settings & Material

- Material: Printed and tested in PETG-HF . This provides a good balance of impact resistance and flexibility. While they have held up great in my testing, your results may vary based on soil density and debris (rocks, roots, etc.). - Walls: Recommend at least 4–6 walls for structural integrity of the spikes. - Infill: 25% or higher. - Supports: None Disclaimer

Use these at your own risk. Adding spikes increases the load on the drive motors and alters the navigation geometry. I have had no issues on my personal unit, but "your mileage may vary." Always monitor the robot during the first run to ensure it clears all obstacles.