Evil dead 2 Movie Poster V2 - Hueforge Art

Hueforge art of the movie “Evil dead 2” (1987)

Project: Evil dead 2 V2.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.29x199.99mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Mistletoe Green Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Mistletoe Green At layer #11 (0.96mm) swap to Orange At layer #14 (1.2mm) swap to Jade White for the rest.