Wave Glow Tealight & LED Lamp – With Diffuser

Boost Me Boost this model if you’re team cozy lighting :D A modern wave-pattern tealight holder designed to create a shadow effect or a soft, cozy diffused light. The diffuser helps smooth the illumination while still letting the wavy cutouts add an interesting decorative touch.

*Only intended for LED lights.

New base – 2 in 1 solution. You can now use it with Bambu LED Lamp Kit-001 OR a LED Tealight

The base is designed with for dual light source options, LED lamp kit and LED Tealights. The new base still fits with the previous released votives.

It's designed with a  Lockable base system  – the votive securely twists into the base so it can easily be moved around and changed.

The base is designed to change with other votives for seasonal decor.  For more votive designs to change with, go here:  https://makerworld.com/en/collections/23448086-tealight-holders

Alternative Lamp kit and LED Tealight suggestions:

Lamp kit (dimmable and color changing options ):  https://www.amazon.com/dp/B0GTNZ1FXW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Rechargeable Tealight:  https://www.amazon.com/dp/B0F3D2LMZB?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1

Size

Height: ~9cm

With: ~7cm

Filament used

- Red Diffuser - Transparent (Translucent) Wine Red PETG  (CREALITY): https://www.amazon.com/dp/B0DNF2FWLX?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_33&th=1 - Black parts - Regular Black PLA (SUNLU)

Printing

- Use a clean print plate with some glue (unless you are using a super tack plate) - Use dried out filament - (Different filament types impact the print differently, please adjust your settings accordingly) - No support required - Fast print time - No AMS needed *Please be careful when removing the diffuser. Gently slide a razor blade or scraper under one edge to lift it slightly, then the rest should come loose easily. Since the diffuser is very thin, the first layer can separate or cause threading if lifted too aggressively, so remove it slowly and gently.

Assembly

- Align the round locking tabs inside the votive with the cut-out slots in the base. Press down firmly and twist clockwise to secure. - To switch to another votive, twist counterclockwise until you feel and hear a “snap,” then lift straight up. - Insert the LED lamp either from the bottom vertically through the cut-out section - OR: Trade the cord from above down through the smaller/thicker cut out section. - Slide in the diffuser from above (if you want the more muted effect) - Align the cord with the arch/cut out section leading outwards and slide the lamp in place. - The LED Tea Light fits in the inner round circle. If you like this design,  please leave a rating, or a comment . If you have a pattern or illustration you’d love to see turned into a tealight, feel free to share your ideas!