Pcub3D - BYOC - Rocky Steps

This model is for use with the Pcub3D - BYOC Modular Mounting System (BYOC System).

The rocky steps are a a 2 plate print.  This model works best with 18 and 24 scale.  If you run ONLY 30 scale i would not recommend this unless you plan to use a cheater ramp or another obstacle to transition to this one.  I've made one line one-time with this obstacle on a 30.  It is challenging with a 24 or 18 scale.  You have to use approach angles, bump and slide, and even servo pulls to navigate this rock.  There is a little side outcropping you can run 30 scale over if this is part of a multi-use course.

This is a new supplementary system to the common MakerWorld Crawler Course/Park plates out there.  This system solves the storage issue of big bulky plates and saves a ton of money because you only have to print the number of BYOC plates you want once and then you can put whatever obstacles you want onto your plate and change it as many times as your want.  Best of all it is FULLY COMPATIBLE with the common connection system found on MakerWorld that are supported by many other course designers.  This system is meant to supplement your course building…NOT change it.  You can orientate most obstacles in 8 different directions and can even mount across plate joints.  NO MORE wasted crawling space!

To use this terrain obstacle you will need to print a BYOC Base Plate and screw in Pins found HERE .

More BYOC Models