Children of the Horned Rat - Hueforge - 4 Colors

Unleash the dark fantasy power of the underworld upon your walls 🐀! This epic Hueforge filament painting brings the fierce Skaven warrior and his clan to life with striking, vibrant details. Designed for a seamless print with zero supports, this model uses just 4 colors to create a deeply textured, glowing stained-glass effect. A must-print masterpiece for wargaming fans and dark fantasy collectors! ⚔️

You can find my other models of the same type on my profile.

https://makerworld.com/en/@3dkmaker

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm

#080a0d PLA PolyLite Black  Transmission Distance: 0.3 #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5 #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2 #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Jade White At layer #17 (1.44mm) swap to BambuLab Green At layer #22 (1.84mm) swap to Yellow for the rest.