
Perky-Pet Squirrel-Be-Gone MAX Bird Feeder Insert
Сведения о модели
- Площадка
MakerWorld
- Цена
- Бесплатно
- Лицензия
- PRIVATE-USE
- Только для личного использования: печатать для себя, без продажи и распространения.
- Форматы
- STEP
- 0 Лайки
- 1 Загрузки
- 1 Напечатали
- 0 В подборках
- 0 Бусты
- 0 Комментарии
- 0 Просмотры
Описание
I have a Perky-Pet Squirrel-Be-Gone Max Wild Bird feeder, and the seed retention guards get nibbled off by the squirrels. This causes the seed to flow extensively when birds peck even a few seeds out, and replacement guards do not last long. I was losing seed and money big time. I would fill the feeder, and it would be empty in a day. I made this insert to offset losses. This insert keeps the seed back from the exit until birds peck and pull it. It is large enough to allow peanuts to exit. I do not buy seed with peanuts, but there is the occasional one in the bag every now and again, and they still are able to pass out the opening. I did not slope the cylinder sides tapering down to the feed exit port. I thought this might bind the seeds from traveling down. I think I was correct because the seed fully disperses, and fewer seeds get caught waiting at the door, which creates that hole-closing moisture trap between the seed and rainwater. With this insert, the seed sits loosely at the opening, and the birds peck every seed. If it sits mounded, they only eat off of the top, and the rain wets what sits in the door. Unfortunately, the birds tend not to pull it out, leading to a foul seed-clogging mess. Needless to say, now a fully filled feeder can last five to seven days, depending on the bird overload. Bird parents, fledglings, and I are all benefiting from this upgrade. Save some seed and feed wildlife longer with this minor modification.
Руководства и профили печати
Профили печати и шаги
0.16mm layer, 2 walls, 15% infill General print with PLA. I let Bambu Studio establish the generative slicing.
Похожие модели


Extra Bird Feeder Perch for the Perky-Pet

Perky-Pet® Squirrel Stumper® Bird Feeder replacement lid

Minimal Hanging Bird Feeder for Gardens

Mason Jar Bird Feeder – 3D Printable Garden Feeder

Bird feeder with rain guard, squirrel deterent hat

The Cathedral - Bird Feeder

Covered Tray Bird Feeder
Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.





