NY Mets Spinner Rally Chain

NY Mets Spinning Rally Chain

Cheer on the NY Mets with a spinning Rally Chain!

Building Your Chain

Once everything has been printed, follow the steps below to put your rally chain together.

- Glue the Middle Post to the Base - Glue the Logo Posts to the Logo - Put a 608 Bearing into the middle of the baseball - Note: The bearing hole will be a tight fit, but I promise it fits. I typically put the bearing part way in then use my palm and weight to push it all the way in. It should be flush with the spinner - Glue the single Logo Post to the Base - Once everything has dried, put the baseball on the Middle Post - Glue the bottoms of the Logo Posts and put the Logo and Logo Posts on top. - Note: You should hear a click when everything is in place. I will typically place a 5 pound weight on it for a bit to make sure it sets correctly. - Once everything has dried again, print some links and get to spinning! Boost Me Looking for more teams? Send me a boost and let me know which team you want next!

Looking for Rally Chain links? Click on the link below!

https://makerworld.com/en/models/1693677-chain-links-for-rally-chains#profileId-1795571