eSun PLA-Silk Bambu Print Profile

I was tired of guessing, so I built this profile to take the headache out of printing with eSUN PLA-Silk / ePLA-Silk / Silk PLA / PLA-Silk / PLA Silk / eSilk-PLA on Bambu Lab printers.

How this profile was made:

The included filament and process/print-settings JSONs are not just a blind copy of generic slicer defaults. It was consolidated from the supplied eSUN/Bambu machine-specific profiles and checked against the official eSUN fast-filament parameter PDF / product information where available.

It corrects several common issues found when using default generic PLA settings:

- Temperature and flow tuned away from generic PLA defaults so high-speed Bambu prints stay consistent.

- Calibrated speeds for clean outer walls and top surfaces without unnecessarily slowing the whole print.

- Max volumetric flow set from the eSUN/Bambu source data to reduce under-extrusion at high speed.

Compatibility:

This is set up as a Universal Profile. Once imported, it is intended to be available for:

- X1 / X1 Carbon / X1E

- P1S / P1P / P2S

- A1 / A1 Mini

- Other current Bambu Lab printer presets found in Bambu Studio

How to Install:

1. Download the .zip file or the raw profile file from the Raw Model Files section and extract it if needed.

2. Open Bambu Studio.

3. Go to File > Import > Import Configs…

4. Select both included JSON files:

- eSUN_PLA-Silk_Universal_Bambu_Filament.json

- eSUN_PLA-Silk_Universal_Bambu_Process.json

5. Select the imported eSUN PLA-Silk Universal Bambu filament profile in the filament dropdown and the matching eSUN PLA-Silk Universal Bambu Process profile in the process/print-settings dropdown.

Important notes:

- Filled/abrasive CF/GF materials should be printed with a hardened nozzle and are not advertised for 0.2 mm nozzles.

- Dry filament is still recommended for best surface finish, especially on high-speed profiles.