3D-модель · MakerWorld

Frog Fruit Fly Trap Lid (IKEA IVRIG & Scalable)

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
STL
  • 7 Лайки
  • 3 Загрузки
  • 3 Напечатали
  • 10 В подборках
  • 0 Бусты
  • 1 Комментарии
  • 0 Просмотры

Автор:OrangeOrca

Опубликована

Описание

Banish pesky fruit flies from your kitchen with a touch of charm! This "Frog Fly Trap" is a custom-designed lid that turns a standard glass into a highly effective, reusable fruit fly catcher. Instead of looking at ugly DIY plastic wrap traps on your counter, you get a cute little frog doing the hard work for you. Just add bait, snap the lid on, and let the frog "eat" the bugs!

Dimensions & Scaling This model is perfectly sized out of the box, but easily adaptable:

- Default Fit: Designed specifically to snap onto the IKEA IVRIG glass (70mm diameter). - Pro Tip (Scaling): You are not limited to IKEA glasses! Simply measure the diameter of any cup or jar you want to use, and scale the model in your slicer. (For example: If your glass is 85mm, scale the model to 121% in your slicer). Key Features

- One-Way Funnel Design: The smooth, steep inner funnel directs flies straight down to the bait, making it virtually impossible for them to navigate back out. - Aesthetic Pest Control: The fun frog design with bulging eyes adds a playful element to your kitchen while hiding the captured flies below. - Reusable & Eco-Friendly: Ditch the toxic bug sprays and disposable sticky traps. Just wash the glass and lid out with warm soapy water and it is ready to be deployed again. - Simple Setup: No complicated assembly. Drop some bait in the glass, pop the lid on, and set it near your fruit bowl. Best Bait Recipe: Pour a splash of apple cider vinegar into the bottom of the glass and add one drop of liquid dish soap . The vinegar attracts them, and the soap breaks the surface tension so they sink immediately. Alternatively, a small piece of overripe fruit (like a peach or banana slice) works wonders!

If you find this model useful, please consider leaving a ⭐️⭐️⭐️⭐️⭐️ review or a Boost! Happy hunting!

Руководства и профили печати

Профили печати и шаги

Standard Print Profile - PLA/PETG This print profile is optimized for a clean surface finish and a snug fit on your glasses.

Print Settings Used:

- Material: PLA or PETG (PETG is recommended if you plan to wash the lid in very hot water, but PLA works perfectly fine for normal kitchen use). - Wall Loops: 2 to 3 (Ensures the rim is durable for snapping on and off the glass). - Infill: 15% Gyroid. - Supports: Depending on your printer's cooling capabilities, you may want to enable Tree Supports to neatly support the tip of the inner funnel - Layer Height: 0.2mm (Provides smooth curves on the frog's face and funnel). To Use: Print the lid, fill your glass with a little apple cider vinegar and a drop of dish soap, snap the frog on top, and say goodbye to fruit flies!

Теги

Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.