MTG Commander Deck Box Mountain 135 Double Sleeved

A single colour Magic: The Gathering commander deck box in Forest green, with mountain patterns running across the whole box. It has a magnetic sliding lid, a front toploader display for your commander, and an interchangeable card tray that fits single, double, or triple sleeved decks.

CAPACITY

The single/double tray holds 135 single sleeved or 115 double sleeved cards (single and double are the same width). The triple tray holds about 110 triple outer sleeved cards. Card size: standard 88 x 63 mm (Magic: The Gathering and Pokemon).

WHAT IT HOLDS

Card tray: choose the tray that matches your sleeves. It has slots for dividers to separate side decks, tokens, and the like, or to snug up a smaller deck. Dice tray: sits on top of the card tray inside the box, for dice or extra cards. Front display: holds your commander in a toploader for quick ID. Push hole: a hole in the base pushes the trays up and out.

MAGNETS

Uses nine 4x2mm magnets. One in each of the three lid holes, and two per hole in the box (three holes) for an extra strong hold.

PRINT SETTINGS Single colour, no AMS needed. 0.4 mm nozzle. Minimal supports. (Layer height and print time: fill these in, I left them out on purpose so we don't post a wrong number.)

ASSEMBLY

- Press in the magnets: three in the lid, two in each of the box's three base holes. - Choose your card tray (single/double or triple) and add dividers to separate cards or snug your deck. - Set the dice tray on top of the card tray inside the box. - Put your commander in a toploader into the front display slot. - Slide the lid on top. - To remove the trays, push up through the hole in the base. TIP Sparkle or Galaxy filament hides the layer lines well.