Бесплатно 
Halloween Tiny glowing jack o lantern pumpkin LED
MakerWorld
3D-модель · MakerWorld
Tiny Glowing Lighthouse Earring, Pendant, Keychain
Сведения о модели
- Площадка
MakerWorld
- Цена
- Бесплатно
- Лицензия
- PRIVATE-USE
- Только для личного использования: печатать для себя, без продажи и распространения.
- Форматы
- 3MF
- 60 Лайки
- 24 Загрузки
- 18 Напечатали
- 171 В подборках
- 2 Бусты
- 13 Комментарии
- 0 Просмотры
Описание
Welcome back witches & wizards!
I just wanted to make one tiny summer earring model, I always had a tiny cozy lighthouse in mind.
So here it is, easy to print with slice by object, not my layer. I suggest printing 2 at once for earrings and use the single LED with magnetic switch from bambulab i linked below in the parts list.
Assembly:
Assembly is easy, just put the LED kit inside the buttom part and stick the yellow part into the top:
Note:
This model was entirely desinged my human in CAD, test printed, optimised. Only some images were enhanced by AI, to show the models purpuse. They always used the real model as a base. AI enhanced images are marked as such.
Руководства и профили печати
Профили печати и шаги
ONLY A-printers - 1 tower - 0.12mm layer, 2 walls - only works on A1, A1 mini and A2L because print by object is selected - print by object, not by layer for only some few filament changes - 0.12mm layer height for high details - only the top part should use tree supports
A-Printers only - 2 towers print by object - only works on A1, A1 mini and A2L because print by object is selected - print by object, not by layer for only some few filament changes - 0.12mm layer height for high details - only the top part should use tree supports
P&X-Printers - slice per object 2 towers - only for P1S, P1, P2S. X1, X2D because it seems like print per object print profile are not automatically compatible with other printers on the bambu app - print by object, not by layer for only some few filament changes - 0.12mm layer height for high details - only the top part should use tree supports
One plate (MANY COLOR CHANGES!) 0.12mm layer, 2 walls - print by layer on one plate which generates MANY COLOR CHANGES and makes the print time onneccesarily long. But bambu app doesnt allow pirnt by object print profiles to automatically adapt to any bambu printer, so if nothing works you can try this. I highly recommend using a print profil with less color changes - 0.12mm layer height for high details - only the top part should use tree supports
3 plates print by layer (works for all printers) - print by layer on 3 plates, which causes way less filament changes - 0.12mm layer height for high details - only the top part should use tree supports
Похожие модели
Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.