DualShock 4 Wall Clip (Skadis & Screw Versions)

DualShock 4 Wall Clip (Skadis & Screw Versions)

Overview

A clean, low-profile mounting solution designed specifically for the Sony DualShock 4 (PS4) controller. This mount features a clever mechanical lock that utilizes the headset jack and the gap behind the trackpad for a super secure, zero-play grip that practically eliminates accidental falls.

Key Features

- Precision Mechanical Lock: Ingeniously designed to anchor using the headset jack and the gap behind the touchpad, holding the controller firmly in place. - Quick-Release Function: Simply press down slightly on the controller's trackpad, and it easily pops or drops right out of the mount when you are ready to play. - Charge While Mounted: Features a dedicated cutout, allowing you to easily plug in a Micro-USB charging cable to power up the controller while it is securely docked. - Two Mounting Variants Included: - IKEA Skådis Version: Features integrated 90-degree hooks that slide securely into standard IKEA Skådis pegboards. - Screw-Mount Version: Features a solid backplate with countersunk screw holes for a flush, secure installation directly onto drywall, wood, or custom display boards. Recommended Print Settings

Setting Recommendation

Layer Height 0.20 mm

Wall Loops / Perimeters 3 – 4 (provides critical strength for the Skadis hooks and clip arms)

Infill 30% (Gyroid or Grid) – Higher infill is required to ensure the Skadis pins have maximum strength to prevent snapping.

Supports Yes – Supports are required to properly print the overhangs and mounting pegs.

Material PLA Recommended – PLA provides the exact flex needed for the quick-release mechanism to function smoothly, while remaining safe against the controller's body.

Installation Notes

- Skadis Version: Slide the L-shaped hooks directly into your pegboard slots and press down to seat it flush against the board. - Screw Mount Version: Use standard countersunk screws. If mounting directly into drywall, it is highly recommended to use drywall anchors to ensure the mount remains solid over time.