Sea Breeze - Sailboat Tealight Holder & LED Lamp

A little sailboat glowing against the waves—perfect for adding a calm, coastal feeling to any room or boat.

*Only intended for LED lights.

I did print this sailboat votive holder with Matte White PLA but if you prefer a brighter glow, print with a regular PLA.

Size

Height: ~9cm

With: ~7cm

The base is designed with for dual light source options, LED lamp kit and LED Tealights.

It's designed with a  Lockable base system  – the votive securely twists into the base so it can easily be moved around and changed.

The base is designed to change with other votives for seasonal decor.  For more votive designs to change with, go here:  https://makerworld.com/en/collections/23448086-tealight-holders

Lamp kit and LED Tealight suggestions:

- Lamp kit (dimmable and color changing options ):  https://www.amazon.com/dp/B0GTNZ1FXW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 - Rechargeable Tealight:  https://www.amazon.com/dp/B0F3D2LMZB?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1 Filament used

- White (Votive Holder) - Matte PLA - Bambu - Cobalt Blue (base) - PLA Basic - Elegoo: https://www.amazon.com/dp/B0FQ5R715P?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_8&th=1 Printing

- Use a clean print plate with some glue (unless you are using a super tack plate) - Use dried out filament - (Different filament types impact the print differently, please adjust your settings accordingly) - No support required - Fast print time - No AMS needed Assembly

- Align the round locking tabs inside the votive with the cut-out slots in the base. Press down firmly and twist clockwise to secure. - To switch to another votive, twist counterclockwise until you feel and hear a “snap,” then lift straight up. - Insert the LED lamp either from the bottom vertically through the cut-out section - OR: Trade the cord from above down through the smaller/thicker cut out section. - Align the cord with the arch/cut out section leading outwards and slide the lamp in place. - The LED Tea Light fits in the inner round circle.

If you have a pattern or illustration you’d love to see turned into a tealight, feel free to share your ideas!

If you like this design,  please leave a rating, a comment, or a boost .

Boost Me All aboard the boost boat!

No worries if you can't boost, a rating or a comment is very much appreciated as well! 💛