SnapShield–Click-Snap Mosquito Screen Repair Patch

Rounded Version (Medium size) Dimensions

- Front piece: 132 × 84 × 6.2 mm , including snap pins - Rear piece: 132 × 84 × 4.2 mm - Complete print layout: 132 × 178 × 6.2 mm Recommended Print Settings

- Material: PETG recommended for more flexible and durable snap joints - Alternative material: PLA or PLA+ - Nozzle: 0.4 mm - Layer height: 0.20 mm - Walls: 4 - Top/Bottom layers: 5 - Infill: 15–20% - Supports: Not required - Brim: Optional, 3–5 mm - Print orientation: Use the orientation already provided in the file - Print speed: 40–60 mm/s - First layer speed: 20 mm/s - Seam position: Rear or nearest corner For best results, print TEST_SNAP first to verify the snap-fit tolerance with your printer and filament. If the connection is too tight, slightly reduce material flow or apply a small negative XY compensation.

Medium Version (Rectangular) Dimensions : Front Piece: 144 × 92 × 2.8 mm

- Front Piece Including Clips: 144 × 92 × 6.2 mm - Rear Piece: 144 × 92 × 4.2 mm - Fully Assembled: 144 × 92 × approximately 7.3 mm Optimized print profile for producing two complete SnapShield mosquito screen repair patches .

The parts are printed flat with 0.20 mm layer height , 3 walls and 15% infill . No supports are required .

PETG is recommended for its flexibility, strength and improved outdoor durability. PLA can also be used for indoor or shaded installations.

Allow the parts to cool completely before removing them from the build plate. Remove any stringing around the connection points before assembly.

The integrated snap-fit system is designed to hold the two sides together without additional hardware. If the connection feels loose because of printer tolerances, screen thickness or material flexibility, a few small drops of suitable glue can be added between the frames for extra security.

(mini) Little version - Rectangular Dimensions:

- Front Piece: 72 × 46 × 2.2 mm - Front Piece Including Clips: 72 × 46 × 5.35 mm - Rear Piece: 72 × 46 × 3.4 mm - Fully Assembled: 72 × 46 × approximately 5.6 mm - Print Layout: 154 × 46 × 5.35 mm

Optimized profile for the compact SnapShield mosquito-screen repair patch . The model prints flat and uses a dense perforated center to restore protection while maintaining airflow and visibility.

- Material: PLA - Nozzle: 0.4 mm - Layer height: 0.20 mm - Wall loops: 2 - Infill: 15% Grid - Top layers: 5 - Bottom layers: 3 - Supports: Not required - Brim: Automatic 5 mm - Orientation: Print flat as arranged - Printer: Bambu Lab A1 or equivalent For the cleanest holes, ensure the build plate is clean and avoid excessive first-layer squish. Align both parts on opposite sides of the damaged screen and press the four connection points together. If your printer produces a slightly loose fit, a very small amount of glue can provide additional security.

Rounded Big Version Dimensions

Component Dimensions

Front piece 220 × 100 × 2.8 mm

Front piece including clips 220 × 100 × 6.2 mm

Rear piece 220 × 100 × 4.2 mm

Fully assembled 220 × 100 × approximately 7.3 mm

Designed for easy printing with no supports.

Setting Recommended value

Material PLA / PLA+

Nozzle 0.4 mm

Layer height 0.20 mm

Initial layer height 0.20 mm

Wall loops 2

Top layers 5

Bottom layers 3

Infill 15%

Infill pattern Grid

Supports No

Brim Auto, 5 mm

Print sequence By layer

Wall generator Classic

Orientation Print in the supplied orientation