sleepypod Dial Enclosure for M5Stack Dial

sleepypod Dial Enclosure for M5Stack Dial — Фото 2 из 5

sleepypod Dial Enclosure for M5Stack Dial — Фото 3 из 5

sleepypod Dial Enclosure for M5Stack Dial — Фото 4 из 5

3D-модель · MakerWorld

sleepypod Dial Enclosure for M5Stack Dial

Площадка: MakerWorld
Цена: Бесплатно
Лицензия: CC-BY-NC-SA; Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
Форматы: 3MF

0 Лайки
1 Загрузки
1 Напечатали
1 В подборках
0 Бусты
0 Комментарии
0 Просмотры

Автор:Escargot Garage

Опубликована 28.09.2026

Скачать на

MakerWorld

Описание

A bedside enclosure for the sleepypod Dial, a physical temperature knob for your Pod.

The sleepypod Dial turns an M5Stack Dial (ESP32-S3, 1.28" round touchscreen, rotary encoder) into a one-handed bed temperature control. Turn it to set the temperature, click to turn the side off, click again to bring it back. The arc shows where your mattress is and where it's heading. At night it dims itself so it won't light up the room.

It talks to sleepypod-core on your own network. No cloud, no app, no account.

WHAT YOU NEED - M5Stack Dial v1.1 - A Pod running sleepypod-core - USB-C cable and power adapter

- Optional: heat set threaded inserts

The enclosure is sized for the Dial v1.1 body (45 mm) and knob (51 mm).

OPEN SOURCE FIRMWARE AND SETUP

Code, flashing steps, and setup guide: https://github.com/sleepypod/m5-rotary-dial

See every screen and how each control behaves: https://sleepypod.github.io/m5-rotary-dial/