Albert Einstein Portrait Bust

0.2mm layer, 2 walls, 5% infill Recommended Print Settings:

Layer Height: 0.12 mm – 0.16 mm (recommended for maximum detail on facial features and hair)

Infill Density: 10% – 15%

Infill Pattern: Gyroid or Adaptive Cubic

Wall Loops / Perimeters: 2 – 3

Top / Bottom Layers: 4 top, 3 bottom

Print Speed: 50–80 mm/s for outer walls (lower speed preserves sharp face details)

Supports & Orientation:

Orientation: Model is pre-oriented upright on its flat base.

Supports Required: Yes

Support Style: Tree / Organic supports (easier to remove with minimal surface scarring)

Support Placement: On build plate only (focusing under the chin, collar, nose, ears, and deep hair overhangs)

Material & Hardware:

Recommended Material: PLA, Tough PLA, or Matte PLA (or SLA Resin for maximum fine resolution)

Nozzle Size: 0.4 mm (0.2 mm optional if printing at smaller scales)

Bed Adhesion: Textured or Smooth PEI sheet; clean with IPA prior to printing. Add a 5 mm outer brim if printing with materials prone to warping.