Elecrow CrowPanel Advance 7-inch Touchscreen Mount

This is a simple mounting bracket I designed for the Elecrow CrowPanel Advance 7-inch ESP32 touchscreen with the acrylic case .

The bracket attaches to the back of the CrowPanel case using its four M4 mounting points and adds a center-mounted 1/4"-20 threaded heat-set insert. This makes it easy to mount the display to standard camera and video equipment such as tripods, magic arms, clamps, and other 1/4"-20 accessories.

I designed this for my own studio setup, where I use the CrowPanel as a custom touchscreen control panel.

Hardware

Here is the exact hardware I used. The following are affiliate links. As an Amazon Associate I earn from qualifying purchases.

- Elecrow CrowPanel Advance 7-inch ESP32 touchscreen (you must select the acrylic case): https://tidd.ly/4z8b4iG - 4 × M4 screws for attaching the bracket to the CrowPanel: https://link.amazon/B0elO5e6q - 1 × 1/4"-20 heat-set threaded insert: https://link.amazon/B05W4aPru The 1/4"-20 insert is melted into the center hole using a soldering iron or heat-set insert tool.

Printing

I printed the bracket in PETG for extra strength, but PLA should also work fine for normal indoor use.

Build Video

I made this bracket as part of a YouTube video where I turn the CrowPanel into a macro pad for controlling my studio recording setup (~6:24):