Longer Tiktok Gravity knife( Various styles )长款萝卜刀
Сведения о модели
- Площадка
MakerWorld
- Цена
- Бесплатно
- Лицензия
- PRIVATE-USE
- Только для личного использования: печатать для себя, без продажи и распространения.
- Форматы
- 3MFSTL
- 7 859 Лайки
- 32 828 Загрузки
- 23 362 Напечатали
- 15 846 В подборках
- 714 Бусты
- 2 081 Комментарии
- 0 Просмотры
Описание
对原作进行了加长，同时对一些细节进行了修改更便于 无支撑打印，不需要金属件 。如有需要可以底板涂点胶水。
The original work has been lengthened, and some details have been modified to make it easier to print without support.No metal parts required .If necessary, apply some glue to the plate.
2024/3/19:
增加了一款刀片，根据微技术Microtech刀型制作。可以直接替换原刀片。刀尖尖锐，请注意安全。
A blade has been added, made according to Microtech knife type. Can directly replace the original blade.The tip of the knife is sharp, please pay attention to safety.
2024/3/31:
很多人想要短款的。我重新上传了75cm的版本。
Many people want short styles. I re-uploaded the 75cm version.
2024/4/7:
我制作了一个梳子版本。
I made a comb version.
重新制作了带系绳孔的刀柄，并修复了非流形错误。
Reworked the hilt with lanyard holes and fixed non-manifold bugs.
加大了一点刀钮尺寸，放在源文件里的pin set V2.stl，如果还是太松可以用点胶水。
Increase the size of pin set and put it in the ‘pin set V2.stl’ in the source file. If it is still too loose, you can use some glue.
Руководства и профили печати
Профили печати и шаги
长款萝卜刀Longer Tiktok Gravity knife
Original short knife 原版短款 Original short knife 原版短款 75cm
Microtech knife type and fixed hilt 微技术刀型修复刀柄 根据微技术Microtech刀型制作。
Made according to Microtech knife type.
重新制作了带系绳孔的刀柄，并修复了非流形错误。
Reworked the hilt with lanyard holes and fixed non-manifold bugs.
fidget toy comb 梳子版 fidget toy comb 梳子版
AMS multi-colored, 0.2mm layer, 3 walls, 15% infill Arranged objects to enable print by object so that the AMS could be used to change filament color and still print everything on one plate
A1 Mini - 0.2mm layer, 3 walls, 10% infill
A1 Mini AMS Plated and organised
Comb for A1 mini
(for A1 mini) 0.16mm layer, 3 walls, 10% infill This profile includes my preferences of quality and stability.
0.2mm layer, 3 walls, 15% infill .2 layer height
.4mm nozzle
tree supports
0.2mm layer, 4 walls, 100% infill I printed it with Geeetch PLA in the colors Silk Orange and Black. On the body, I added a support structure at the top of the rounding and at the bottom of the shell. To ensure stability I printed everything in 100% infill. I glued the two pins to the blade with hot glue to attach the blade to the body because they kept falling out.
0.2mm layer, 3 walls, 15% infill Separated in 3 plates for different colors without AMS
Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.