Ground Stakes Spike for Garden Lights M5 Erdspieß
Сведения о модели
- Площадка
MakerWorld
- Цена
- Бесплатно
- Лицензия
- CC-BY-NC-SA
- Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
- Форматы
- STEP
- 73 Лайки
- 251 Загрузки
- 155 Напечатали
- 196 В подборках
- 11 Бусты
- 20 Комментарии
- 0 Просмотры
Описание
Hello everyone,
This time I made a ground spike for my garden lighting .
I highly reccomend printing in ASA, ABS or PETG to make them weather proof!
20mm Maximum screw length.
There are two versions:
- With printed M5 thread - With a hole for a threaded insert With the attached STEP files you can customize the spike so that it fits your needs.
If any of my fellow american friends need a version for their non metric screws just hit me up and I can create a new version for you
As always, have fun and be cool to each other.
Руководства и профили печати
Профили печати и шаги
1x Spike for Threaded Insert !!!!This Model requires a M5 Threaded insert!!!!
Print in ASA, ABS or PETG because of UV rays and weather
0.2mm layer, 3 walls, 25% infill
4x Spike for Threaded insert !!!This Model requires a M5 Threaded insert!!!
Print in ASA, ABS or PETG because of UV rays and weather
0.2mm layer, 3 walls, 25% infill
1x Spike with printed Thread 0.2mm layer, 3 walls, 25% infill
Print in ASA, ABS or PETG because of UV rays and weather
4x Spike with printed Thread 0.2mm layer, 3 walls, 25% infill
Print in ASA, ABS or PETG because of UV rays and weather
Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.
Комментарии