Batman hueforge - 8 color original artwork

This is an original piece, not downloaded off google images.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyTerra Sapphire Blue Transmission Distance: 0.3 PLA BambuLab Matte Charcoal Transmission Distance: 1.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 1.5 PLA BambuLab Basic Blue Gray Transmission Distance: 2.9 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA Sunlu Matte White Transmission Distance: 5 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 3.2

Swap Instructions: Start with Sapphire Blue At layer #5 (0.48mm) swap to Charcoal At layer #6 (0.56mm) swap to Scarlet Red At layer #10 (0.88mm) swap to Blue Gray At layer #16 (1.36mm) swap to Lemon Yellow At layer #20 (1.68mm) swap to White At layer #21 (1.76mm) swap to Latte Brown At layer #24 (2mm) swap to Ivory White for the rest.