Dummy 13 Spider Man 200%

0.2mm layer, 2 walls, 15% infill

faster print with magnetic Hands 8x2

0.16mm layer, 4 walls, 10% infill, 150% This is for non AMS users, the colors are separated in plates, including the head from 3D_Grandpa

6x3 and dual 6x3 magnets Since I only had 6x3 magnets I edited hands and feet to allow for 6x3 magnets. I found it to be not-so-sticky so I added another version with 2 6x3 magnets in each hand and foot. Now it sticks much better.

Plates 1-3: [Untoched] Plate 4: Single 6x3 magnets Plate 5: All red parts except for hands and feet (so you can choose) Plate 6: Double 6x3 magnets (+ spidey hands from original design)

Mangets are a very tight fit. I recommend letting the magnet on the table and press the part against it.

Hope you like it!

Venom 0.16mm layer, 4 walls, 10% infill 0.16mm layer hieght - Optimal quality.

No AMS needed

Wall loops: 4

Recommendation: Wash plate with detergent before print.

Stronger body, Higher quality head, 2 plates Body: - 0.2 mm layer height - 3 walls - 10% infill - Ironing enabled - Arachne wall generator to print better shapes

Head: - 0.16 mm layer height for better quality - 3 walls for strength - 10% infill - ironing concentric - Arachne - One wall on top - disabled - better round shape

SpiderGwen 0.2mm layer, 2 walls, 15% infill Recoloreado y con una capucha para tener a Gwen

Spiderman Dummy 13 | A1 Mini Compatible | AMS Version Same thing but with AMS and A1 Mini Compatible

I also changed the spider logo to black for a more classic spiderman look.

Enjoy, and happy printing.