POLYZON
Starlink Gen3 Router and Power Supply Wall Mount
Starlink Gen3 Router and Power Supply Wall Mount — Фото 2 из 5
Starlink Gen3 Router and Power Supply Wall Mount — Фото 3 из 5
Starlink Gen3 Router and Power Supply Wall Mount — Фото 4 из 5
Starlink Gen3 Router and Power Supply Wall Mount — Фото 5 из 5
3D-модель · MakerWorld

Starlink Gen3 Router and Power Supply Wall Mount

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
CC-BY-NC
Можно печатать и изменять для себя с указанием автора; продавать модель и отпечатки нельзя.
Форматы
STL
  • 356 Лайки
  • 1 817 Загрузки
  • 778 Напечатали
  • 772 В подборках
  • 57 Бусты
  • 83 Комментарии
  • 0 Просмотры

Автор:cmrnwdwrd

Опубликована

Скачать на MakerWorld

Описание

This wall mount is for the router and power supply of the gen 3 Starlink. It is made for command strips, velcro, or 3m tape although I plan on a version that uses drywall screws. The router is unfortunately too wide to print a mount in a single piece so it will have to be glued together. Let me know if you have any suggestions for changes and I'll update the model. Please make sure to rate and let me know how your print turned out!

Руководства и профили печати

Профили печати и шаги

0.2mm layer, 3 walls, 5% infill Fits all on one plate! I used ABS, but I imagine PLA and PETG would work fine as well.

0.2mm layer, 3 walls, 5% infill love this print but didn't want to fight the gluing part so decided to add pins to make it easier to glue it together.  the pins are two different sizes large on bottom and small on top.  depending on printer settings and filament you may need to resize the pins to fit your needs.

H2D Version (incl. version with more space for cables) This upload is only printable with an H2D (or similar large printer)

There are two plates (select one of either):

- Includes the power supply housing as well as the router housing. The router housing is longer on the back. This prevents needing to bend the cables too strong (especially in Bypass mode where you've got a Ethernet cable on the back). - The original model from the designer for the H2D.

Теги

spacexstarlinkmountinternetrouterdishygen3gen4
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.