Soap Corner Tray with Drainage

Soap Tray (in two sizes) for shower shelf is intended to be placed on a corner shelf of your shower. The corner of the shower can be a sharp corner or a rounded corner - as is common with fiberglass shower inserts. Drains liquid back into the shower to keep soap dry between uses.

You may want to attach self-adhesive rubber bumper pads to the bottom of the Soap Corner Tray (or any other flat-bottomed object that you print) if you want to help keep it in place and/or you want some air circulation below when it's used in a wet location!

I've included a couple photos showing some of these rubber bumper pads on a Soap Corner Tray.

The provided STL files are intended to be printed in PETG or TPU (FLEX) and don't require supports.

3MF files are provided for generic PETG and generic TPU.

The Soap Trays seen in the photos were printed with White Sunlu PETG (normal size soap tray) and with Giantarm Transparent TPU (smaller soap tray) with a 0.4mm nozzle at 0.2mm layer height with 10% Gyroid infill.

Be sure to check out  my other designs  - including honeycomb storage wall (HSW) accessories, universal key covers, and a diverse collection of household accessories and 3D printing tools - on MakerWorld at  https://makerworld.com/en/@PhilCaruso