Thanksgiving - Hueforge 4 color filament painting

0.08mm layer, 2 walls, 100% infill

8-color, 0.08mm layer, 1 walls, 100% infill Love the Image… The 4-color greyscale is beautiful… but wanted to add a little fall color to a Hueforge remix.

Bummer that the original image was not provided by the Designer. This 8-color version is actually a Hueforge re-creation from a so-so “snipped” image from within Hueforge - included in the Designer download. Using the original image would have provided a much cleaner output for this this 8-color iteration. Oh Well ! Hueforge Describe for this 8-color version as follows:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

Filaments Used: PLA Overture Matte Black Transmission Distance: 0.5 PLA Overture Cement Gray Transmission Distance: 2 PLA PolyTerra Muted Red Transmission Distance: 1 PLA PolyTerra Army Beige Transmission Distance: 0.5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA Overture Matte Light Gray Transmission Distance: 3 PLA PolyTerra Pastel Peach Transmission Distance: 3.5 PLA Overture Matte White Transmission Distance: 5

Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Cement Gray At layer #13 (1.12mm) swap to Muted Red At layer #14 (1.2mm) swap to Army Beige At layer #16 (1.36mm) swap to Sunrise Orange At layer #18 (1.52mm) swap to Light Gray At layer #21 (1.76mm) swap to Pastel Peach At layer #29 (2.4mm) swap to White for the rest.