Бесплатно 
Custom Batman & Superman Edition Riser V2 *
Printables
3D-модель · MakerWorld
Custom Batman & Superman Edition Riser V2 *
Сведения о модели
- Площадка
MakerWorld
- Цена
- Бесплатно
- Лицензия
- CC-BY-NC-SA
- Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
- Форматы
- STL3MF
- 95 Лайки
- 312 Загрузки
- 143 Напечатали
- 211 В подборках
- 66 Бусты
- 113 Комментарии
- 0 Просмотры
Описание
I had had alot of request for my customization of the Batman version of the Riser V2.
With https://makerworld.com/en/@maCyo42 permission it is yours to have.
The 3mf file has all the print parameters to make things print smoothly.
The side panels print at a 0.16 mm layer height but everything else is at 0.2 mm.
** UPDATE 8/26/24**
- I've updated the model to include X1C front panel top covers. You will print the front panels from the original AMS riser V2. Then, you can print the Batman covers here. Thanks for the downloads and boosts.
** UPDATE 11/05/24**
- Without further ado, I have finally created the Superman version you guys have been asking about. It includes everything for the P1S and X1C. Just check the new print profile I added.
Руководства и профили печати
Профили печати и шаги
0.2mm layer, 2 walls, 15% infill I had had alot of request for my customization of the Batman version of the Riser V2.
With https://makerworld.com/en/@maCyo42 permission it is yours to have.
The 3mf file has all the print parameters to make things print smoothly.
The side panels print at a 0.16 mm layer height but everything else is at 0.2 mm.
** UPDATE 8/26/24**
- I've updated the model to include to X1C front panel top covers. You will print the front panels from the original AMS riser V2. Then you cnan print the batman covers here. Thanks for the downloads and boosts.
0.2mm layer, 2 walls, 15% infill. After many request , I have created custom Superman-themed parts for the V2 riser by maCyo42 https://makerworld.com/en/models/133452?designId=133452#profileId-155321 .
Leave your comments, suggestions, good words, and boosts so I can keep making the design you all want
*Update 11/8/2024 *
Fixed model so there is no floating cantilever.
0.2mm layer, 2 walls, 15% infill Added profile that fixes the issues with the back panel so it can be printed.
Похожие модели
Бесплатно 
BLV - AMS / AMS 2 Riser P2S / X2D / X1C / P1S v4
MakerWorld
Бесплатно 
Sunlu S2 SLIM Mount for V2 AMS Riser
MakerWorld
Бесплатно 
Cut-Out Cover for AMS Riser V2 by maCyo42
MakerWorld
Бесплатно 
Honeycomb Drawer for AMS Riser V2 by maCyo42
MakerWorld
Бесплатно 
Yi Cam AMS Riser V2/V4 Mount for P1S / P1P / X1C
MakerWorld
Бесплатно 
AMS Riser V2 Punisher
MakerWorld
Бесплатно 
Thordsen 3D IFD-175 AP mount for AMS Riser V2
MakerWorld
Бесплатно 
AMS Riser V2 - Part 5 - Hide the Panda Touch wire
MakerWorld
Бесплатно 
Super Printendo Customization Kit for AMS Riser V2
MakerWorld
Бесплатно 
AMS Riser v2 Gridfinity Drawer Complete Hotend Bin
MakerWorld
Бесплатно 
X1C Remix for AMS Riser Remix (12mm Lightstrip)
MakerWorld
Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.