32, 38mm Intex/Bestway thru-pool hose adapter

Update 9/12/25: The original Print profile got taken down due to me not uploading the correct printed picture. The current profiles are the same ones that have been reviewed, but re uploaded with an actual printed picture. Sorry for the inconvenience, I will make sure the printed picture are on my profiles going forward :)

This goes through the filter hole in an Intex or Bestway above ground pool. Is made for 32mm hoses and uses the plastic clamps that come with the pool, but should fit snug as well. Used this to connect a hose from the pump to the skimmer I printed for a quick and durable connection. I would print it out of PETG, but ABS/PLA would probably be just fine. Print how you normally would, at least 2 perimeters and at least 25% infill. No support needed, print big side down. A brim might be necessary, but YMMV.

I have provided the STEP file which should work with most modern slicers! Ill probably add an STL eventually, but round/circular objects tend to fare better with STEP files :)

Hope it works for you and happy printing/swimming!

Boost Me If this was helpful, please feel free to leave a boost, it very much helps create new things! Thank you! Membership This model falls into the BPW Standard Commercial Tier. If you want to use these for commercial purposes please see licensing agreement and join. Thank you:) Old Updates:

Update 9/4/25: I have added a 38mm variant step file and profile for 38mm hoses. I do not have a 38mm hose, so it is in beta until someone can confirm that it works for them. Enjoy!

Update 6/10/25: If you print this model, please consider adding a picture :) I no longer have an Intex pool and cant upload a pic in action. I would very much appreciate the gesture. Thanks for your support!