POLYZON
Dummy 13 - 500%
Dummy 13 - 500% — Фото 2 из 6
Dummy 13 - 500% — Фото 3 из 6
Dummy 13 - 500% — Фото 4 из 6
Dummy 13 - 500% — Фото 5 из 6
Dummy 13 - 500% — Фото 6 из 6
3D-модель · MakerWorld

Dummy 13 - 500%

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
CC-BY-NC-SA
Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
Форматы
3MF
  • 3 131 Лайки
  • 7 916 Загрузки
  • 3 279 Напечатали
  • 5 691 В подборках
  • 854 Бусты
  • 1 238 Комментарии
  • 0 Просмотры

Эта модель на других площадках

Автор:Vasichkin

Опубликована

Скачать на MakerWorld

Описание

Check new version, - Dummy 13 v1.0 in scale

It's full set of parts to print excellent Dummy13 by @soozafone in 500% scale. This remix fixes most of the problems you could get if tried this scale. I believe this will work also for 300%-700% scale. Tested on A1 Mini.

Also, it contains fully rebuild hands: fingers are with articulated joints and printed in one piece (it's pain to assemble them in this scale when printed separately). Finger-palm joints separated.

You'll need 0.6kg for skeleton and 0.75kg of filament for armour.

Before printing this model, I suggest to print posable hand model to verify filament and printer settings.

For frame, use PETG, ASA, etc. PLA will got loosen over time in joints because of creep.

If you already printed in PLA, use inserts printed in PETG or ASA

Differences of the remix compared to the original

- Fully rebuild hands. It's compilation of easy13 posable hands and dummy13 posable hands with separated finger-palm joints. Fingers made to be printed in place; - Used Joints+ instead of original (original tent to crack on assembly); - Added joints inserts for stiffness. Should help when joints printed in PLA; - Changed head, modified to have detachable eye; - Eye printed separately. Glue should be used to attach it. I've used glow in dark filament to print eye. - Most of joints has fuzzy skin modified areas, to improve friction needed for this scale; - Modified armour to match scale (different scale - different tolerances)

All that was result of printing in 500% scale and fixing non-working parts.

Repairing loose joints - if you already built robot

UPD: v1.1 Skeleton files updated (palm-finger joints were too loose, also redone finder joints)

UPD: v1.2 Added inserts for Joints+.

Reviews and prints of my scaled models:

- Dummy 13 Beta on makerworld - Dummy 13 V1.0 on makerworld - Dummy 13 Beta on printables - Dummy 13 V1.0  on printables Please, check my other stuff on makerworld , printables , Lightest cable organizer , share your print and happy printing!

Boost Me Models like this requires lots of filament for testing model. Please, support me with Boost, so I can create more models. Thank you!

Check my  stuff:

Parametric Trash Bag roll holder

Dummy 13 collection Dummy 13 V1 Kit Card See also:

Household organization collection

Руководства и профили печати

Файлы руководств

Профили печати и шаги

Armour, 0.2mm layer, 3 walls, 10% infill Armour for Dummy13. A1 Mini compatible

Skeleton. 0.2mm layer, 3 walls, 10% infill Skeleton for Dummy13, A1 Mini compatible

Skelett - 0.2mm layer, 3 walls, 10% infill - X1C Profil Skelett auf 3 Druckplatten, ohne Ringeinsätze, für den X1C

Armor - 0.2mm layer, 2 walls, 15% infill - X1C Profil Armor auf 2 Druckplatten für den X1C

Minimum Plates Made from 10-11 plates to 6-7.  Added supports. Not compatible with A1 Mini.

Visual Colour fitting and printing profile Do Not Print plate 1 - it only for colour mixing

Do you want to mix and match your dummy 13 amour? But dont have a visual model to see the final result, and mistake will be costly for this scale, I have the same problem myself so I have create a simple assembly so you can mix and match the amour to you liking before the print finished, 1st plate is not for printing only for visual. Have fun! Happy printing!

0.2mm layer, 3 walls, 20% infill I added 0.4 Fuzzy to the ball joints and knee and elbow joints. It's a big improvement but still not quite enough to completely stiffen the arms but adds a lot more stability overall.

Теги

dummy13dummy 13
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.