Satoru Gojo Jujutsu Kaisen Anime HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size and a 150x150mm profile for A1 Mini users

Feel free to scale as long as you keep the Z axis the same You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Sunlu Purple Transmission Distance: 15 PLA Sunlu Blue Grey Transmission Distance: 3.9 PLA Sunlu Cyan Transmission Distance: 10 PLA PolyLite Natural Transmission Distance: 21 PLA PolyLite White Transmission Distance: 5 This print uses 6 unique filaments

Adjust for your filament situation in Bambu Studio preview - I use a single AMS and swap filaments midway through

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Purple At layer #14 (1.2mm) swap to Blue Grey At layer #18 (1.52mm) swap to Cyan At layer #22 (1.84mm) swap to Natural At layer #23 (1.92mm) swap to White for the rest.

Frame found at https://makerworld.com/en/models/49964#profileId-51734