POLYZON
Print-in-place Cat Toys - V1
Print-in-place Cat Toys - V1 — Фото 2 из 4
Print-in-place Cat Toys - V1 — Фото 3 из 4
Print-in-place Cat Toys - V1 — Фото 4 из 4
3D-модель · MakerWorld

Print-in-place Cat Toys - V1

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
3MFSTL
  • 2 383 Лайки
  • 14 418 Загрузки
  • 11 435 Напечатали
  • 6 368 В подборках
  • 308 Бусты
  • 1 046 Комментарии
  • 0 Просмотры

Автор:LRB Design

Опубликована

Скачать на MakerWorld

Описание

Print in place cat toys

V3 is out now! → Print-in-place Cat Toys - V3 - Free 3D Print Model - MakerWorld 😺

Or print V2! → Print-in-place cat toys - V2 by LRB Design - MakerWorld 😺

Warnings!

- Please do not scale down cat toys! They were made to be the perfect size for cats, any smaller could be a choking hazard. - Please only print in basic materials like PLA, PETG, and TPU, as they are the safest filaments to print cat toys in.

Cat toys description

I wanted to create a model that is simple and easy to print, lightweight, and fun for your pets.

— So, I came up with this! To separate the inner ball from the outer ball:

just push the inner ball with your finger or separate it with pliers until it pops.

Check out the new Twist-open cat toys!

Twist-open cat toys - V1 - Free 3D Print Model - MakerWorld

Руководства и профили печати

Профили печати и шаги

SIMPLE, BELL, 0.2mm layer, 2 walls, 15% infill

VORONOI, BELL, 0.2mm layer, 2 walls, 15% infill

SIMPLE, EMPTY, 0.2mm layer, 2 walls, 15% infill I made pause at the end of print to put in something in it.

0.12mm layer, 2 walls, 15% infill, reduced size Reduced size, perfect for cats to play with it

ALL, 0.2mm layer, 2 walls, 15% infill

VORONOI 0.2mm layer, 3 walls, 15% infill Printed this before but both balls broke barely a week in, so i printed 6 voronoi (they're bouncier, my cat likes those more) to be 3 walls instead of two, can confirm it's much stronger now :)

VORONOI, EMPTY, 0.2mm layer, 2 walls, 15% infill I made pause midprint to put in something inside.

Теги

pet accessoriespetscat toycatscats ball
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.