Bear Emoji

Summary

Bear Emoji inspired from the iOS 13.3 version. Require two same prints , glued togheter after post-elaboration, read instructions ! This emoji can be found here: https://emojipedia.org/bear/ And on Telegram Emoji List right now, in 2020.

Instructions

This was designed to be printed in two separate parts , to have one bear face on every side: in fact, ears fill could be too thin to be printed one-side only. If you want, feel free to remix and make it one-sideable .

After painting and post-elaborating both parts, I glued them toghether.

And I would not trust the hook, if you have a low-end printer: it's very weak!

I printed in PLA, 3-4 walls, 0.16mm layer. For better result slow down the print speed after reaching the details level (like eyes or mouth).

WARNING!!!

This thing isn't perfect. I upload it here AS IS, because I have no time to fix it, but I found no decent 3D printable Bear Emoji.

If someone wants to make it better, here is the list of things that should be fixed:

- mirror left part of the bear better, since mirroring isn't perfect (if opened with blender, you can see the "midline" I used to join two parts). So be carefull: this isn't perfect left-right mirrored bear face! - do the details more rounded: only EYES are in some way rounded. It would be great to have all the mouth and all the glued-togheter parts more rounded. - fix dimensions of details: some details are extruded on 0.1-0.2mm so they are barely visible as "different" for human eye. I didn't want to make it huge, but I make it too small. - hook should be stronger and bigger. You can also make a "punch-hole" version. If you want to do a remix-fix, you can then mark it as "remixed" if you PM me, I will add the link to your version here, to make you print a better version.