Dummy 13 | V1 Kit Card
Dummy 13 | V1 Kit Card — Фото 2 из 10
Dummy 13 | V1 Kit Card — Фото 3 из 10
Dummy 13 | V1 Kit Card — Фото 4 из 10
Dummy 13 | V1 Kit Card — Фото 5 из 10
Dummy 13 | V1 Kit Card — Фото 6 из 10
Dummy 13 | V1 Kit Card — Фото 7 из 10
Dummy 13 | V1 Kit Card — Фото 8 из 10
Dummy 13 | V1 Kit Card — Фото 9 из 10
Dummy 13 | V1 Kit Card — Фото 10 из 10
3D-модель · MakerWorld

Dummy 13 | V1 Kit Card

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
CC-BY-NC-SA
Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
Форматы
3MF
  • 26 173 Лайки
  • 110 346 Загрузки
  • 74 948 Напечатали
  • 61 250 В подборках
  • 5 030 Бусты
  • 9 602 Комментарии
  • 0 Просмотры

Эта модель на других площадках

Автор:Vasichkin

Опубликована

Скачать на MakerWorld

Описание

Dummy 13 V1.0 Kit Card (runners)

Model is based on Dummy 13  V1.0 Release version (latest and final version of dummy 13, not BETA version)

Description

I always had adhesion problems printing dummy in original scale. 1-2 parts fell off randomly and i had to reprint them. Once my son asked to print dummies for his friends, I found that i missed such model. So here it is.

Goal of this model is:

- Solve adhesion problems . Parts should stay in place util end of print; - Minimise parts placement. (150% scaled original runner won't fit on my mini printer); - Optimise parts placement . You can print 2 runners on one plate, even 150% scaled. 4x times less plate space required; - Minimise waste of plastic; - Runners has different left and right hands; - Add extra stuff , hands, weapons (TBD); - Make runner easy detachable. This model contains 2 files, male and female version.

Each file contains 3 plates - frame, armour, extras.

Please, share your print and

Boost Me Prints like this requires lots of filament for testing model. Please, support me with Boost, so I can create more models. Thank you!

Checkout my  stuff:

Halloween Brain-shaped bowl

Dummy 13 collection Dummy 13-F Household organization collection

Dummy 13 in 500% scale , stronger joints ,   Dummy 13 Case

Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0

Руководства и профили печати

Профили печати и шаги

Male dummy 13, 0.16mm layer, High Quality Dummy 13 v1.0 Male minimal runner with extra hands

Female Dummy 13, 0.16mm layer, High Quality Female version of dummy 13 with extra hands

Some parts of frame and armour slightly different from male dummy 13

ORIGINAL Runners 150% scale (Armour + Frame) 150% scaled Armour and Frame runners.

Frame modified to fit A1 Mini in this scale.

Parts are original, created by soozafone.

ARMOR - original, separate parts Original, unmodified ARMOR parts

FRAME - original, separate parts Original, unmodified FRAME parts

0.16mm layer, 2 walls, 15% infill, AMS Print in two colour with AMS support in a single plate by object.

0.16mm layer, 2 walls, 15% infill 200% Dummy 13 200%

quick and easy 0.2mm layer, 3 walls, 10% infill good for speed

0.2mm layer, 3 walls, 10% infill

200% Larger

.12 layers, z axis compensation .12 layer Hight

z axis compensation

0.16mm layer, 2 walls, 15% infill Custom setup of printing swapping from layer to object. This way you can print the entire model with diferente filaments on the same plate avoiding loosing material to flush proccess. compatible with 256> models

0.2mm layer, 2 walls, 15% infill

0.2mm layer, PETG generico modello preparato per la stampa in PETG

BEST QUALITY SETTINGS TWEAKED WITH TO PERFECTION USE TRUST!! I played around with settings for a bit on this, I promise you I got the BEST RESULTS with this one, please at least try it.

0.2mm layer, 3 walls, 15% infill (PRINT BY OBJECT)

Теги

dummy13dummy13runnerdummy 13

Комментарии

Загружаем комментарии…
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.