Crocodile Bag Clip With Lock - Print In Place
Crocodile Bag Clip With Lock - Print In Place — Фото 2 из 6
Crocodile Bag Clip With Lock - Print In Place — Фото 3 из 6
Crocodile Bag Clip With Lock - Print In Place — Фото 4 из 6
Crocodile Bag Clip With Lock - Print In Place — Фото 5 из 6
Crocodile Bag Clip With Lock - Print In Place — Фото 6 из 6
3D-модель · MakerWorld

Crocodile Bag Clip With Lock - Print In Place

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
3MFSTL
  • 15 579 Лайки
  • 69 738 Загрузки
  • 53 006 Напечатали
  • 42 700 В подборках
  • 2 592 Бусты
  • 5 973 Комментарии
  • 0 Просмотры

Автор:Nature Hut

Опубликована

Скачать на MakerWorld

Описание

Take a look at my latest design—a versatile spring-loaded clip! Link: https://makerworld.com/en/models/1163143

Update (Oct 14, 2024): Improved the sharp tail by rounding the edge and added two print profiles: one with two walls and another with four walls for varying strength levels.

Check out another simplified shape clip here: https://makerworld.com/en/models/702396

Introducing the new crocodile-shaped bag clip with a secure lock feature, designed for both fun and functionality. Printed in place without any support, these clips are available in three sizes and ensure a tight seal to keep your bags fresh. Perfect for kitchen storage or on-the-go convenience!

Руководства и профили печати

Профили печати и шаги

0.2mm layer, 2 walls, 15% infill Updated version, 2 walls

0.2mm layer, 4 walls, 15% infill Updated version, 4 walls

5mm magnet eye medium clip 0.2mm layer, 2 walls, 15% infill made the eye hole bigger to accept a 5mm magnet depending on your printer you might need to press fit with plyers or glue. it should be tight.

0.2mm layer, 4 walls, 15% infill 0.2mm layer, 4 walls, 15% infill

PETG version 0.2mm layer, 4 walls, 25% infill Version PETG

0.2mm layer, 4 walls, 15% infill | 5x10mm magnet optimized This is the medium croc slightly sized up on the x/y axis to accommodate press fitting a 5x10mm magnet into the eye hole. This ended up being the best approach for me because when I tried to just size up the eye hole rather than the whole model, the material above the eye cracked. No cracks so far with this approach.

The magnets I purchased actually ended up being just shy of 10mm so I made it slightly shorter on the z axis as well (9.5mm).

If you have access to Bambu Studio you can easily make similar adjustments by clicking on the model and pressing s to scale (make sure uniform scale is off).

Easier to open medium size 0.2mm layer, 2 walls, 15% infill Aún se puede atascar un poco dependiendo de la impresión, pero es generalmente bastante más fácil de abrir y por tanto hay menos posibilidades de que se rompa al forzarla.

0.28mm layer, 2 walls, 15% infill

STRONGER and Gyroid infill (20% ) 0.2mm layer, 4 walls - Stronger and gyroid - 4 walls - 20% gyroid infill - 0,2mm layer

0.16mm layer, 2 walls, 15% infill

5 pieces, all sizes on different plates. Increased strength

0.24mm layer, 2 walls, 20% infill 4 Clips 4 colours print by object

Теги

bag clipbagcliplanyard clipchipchipbagchipbagclipchip clipchipclipclampcrocodilecrocodile clipcrocodile clampclip with locklockclosure clipfood storagebagclampstoragekitchen accesorieskitchenaccessorieskitchenaccessory

Комментарии 0

Загружаем комментарии…

Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.